Serving the Industry Since 1972

Sales: 1.800.631.8375

Color Changing LED Strip Kit – 82-Ft

82 feet Led Color Changing LED Kit

All inclusive kit at one low price. Everything necessary to create professional lighting without the expense of an electrician.

  • Comes complete with everything needed to use right out of the box
  • Includes a multifunction GSR RGB Controller
  • Includes 50 Mounting Clips & 50 Screws
  • Includes 82-ft. roll of 120V RGB strip light
  • Easy to use. Simply plug into a wall outlet and you’re ready to go without the need for professional installation by an electrician
  • No need for transformers, drivers or amplifiers
  • Very low heat emissions… Cool to the touch
  • Ideal for use in which longer runs of lighting are desired


82 feet Led Color Changing LED Kit

82 feet Led Color Changing LED Kit

82 feet Led Color Changing LED Kit

82 feet Led Color Changing LED Kit

Additional Information

Frequently Asked Questions

Q. Can I use the Color Changing Ribbon Strip outdoors?

A. Yes. The strip is protected from immersion in water with a depth of more than 1 meter]

Q. Can I use the RGB Controller outdoors?

A. The RGB Controller can only be used outdoors if sealed in a watertight box that has been specifically designed for this purpose.

Q. I would like to use the LED Strip as a cove light. Does the RGB Controller have an on/off wall switch?

A. No, not at this time. However, one can use a wall mounted light switch that is wired to an AC wall outlet to achieve this purpose.

As an alternative, a Remote Wireless Wall Switch is currently available that can send a signal directly to the outlet.

Q. If I were to turn off the light switch that operates the RGB Controller, will the controller retain my last setting?

A. Yes. The RGB Controller will store the most recent setting until one were to change it.

Q. Can I cut the Color Changing Strip?

A. Yes. However, in doing so, it will void the warranty if the light were to be altered in any manner. In addition, it is absolutely necessary to cut the LED strip where indicated, further noting that the end cap must be resealed to the end of the ribbon strip to produce a watertight seal.

Q. I would like to use the Light Strip for an outdoor event but do not have access to a 120V wall outlet. Are there any alternative methods by which I can power the ribbon strip?

A. Yes. Because the 120V Brite Light Flex Color Changing Ribbon Strip draws only 100 watts per 33-ft., one can easily power the strip by plugging it into a generator.